CapXon Snap-In Capacitor Distributor | High-CV Aluminum Electrolytic

BeiLuo supplies genuine CapXon snap-in aluminum electrolytic capacitors, the compact high-capacitance parts that mount on a printed circuit board with two snap-in terminals for a firm mechanical and electrical connection. A snap-in capacitor goes straight onto the board without a clamp or a bracket, which simplifies assembly and saves space, while still delivering high capacitance, a high ripple current and long life in a case that reaches up to about 35 mm in diameter and 50 mm in height. CapXon's snap-in families include the HU series, a 105 °C range rated 2000 hours with a very high capacitance for its size, and the UJ series, a 105 °C long-life range rated up to 5000 hours for designs that must run for years. Rated voltages run from 10 V to 450 V and capacitances reach well beyond 20000 uF at the lower voltages, so the family covers both a low-voltage hold-up rail and a rectified high-voltage bus. The standardized terminal spacing lets a part drop into an existing footprint, and the operating temperature range is usually -40 °C to +105 °C for industrial equipment. Snap-in capacitors are common in switch-mode power supplies, solar and storage inverters, industrial power conversion and motor-drive auxiliary rails. Every capacitor BeiLuo ships is factory-traceable and includes an import declaration, a certificate of origin and a RoHS compliance file. Our FAE team helps you size capacitance and ripple, check the terminal layout and estimate lifetime from the case temperature and the applied ripple current.